bing tracking image

Mazda Accessories and Parts Installation And Review Videos

  

Yakima JetStream Crossbars Roof Rack Kit Installation - 2021 Mazda CX-5- Video

Yakima JetStream Crossbars Roof Rack Kit Installation - 2021 Mazda CX-5

Hey, everyone, it's Evangeline right here at etrailer. Today we have the Yakima roof rack, and we're gonna take a look at how it fits and how it installs here on our 2021 Mazda CX-5. The specific parts we have here are the 50-inch long JetStream bars, the Baseline Towers, and the custom-fit kit. You can get this whole thing kitted together here on our website. If you wanna carry around fun accessories, like a roof box or kayaks or roof-mounted bike racks, what you first need is a roof rack system. And depending on your vehicle trim, there are different types of roof racks. more


Watch Video

4/30/2024 11:51:19 AM



BrakeBuddy Towed Vehicle Battery Charge Kit Installation - 2016 Mazda MX-5 Miata- Video

BrakeBuddy Towed Vehicle Battery Charge Kit Installation - 2016 Mazda MX-5 Miata

Hey everyone, Ryan here at etrailer. Today on our 2016 Mazda MX-5 Miata, we're gonna be showing you how to install the Brake Buddy Towed Vehicle Battery Charge Line Kit. But before we do that, why don't we check it out and make sure that this is gonna work for you. A battery charge line kit is usually something that I recommend for any vehicle that's getting flat towed down the road. And it's a small component but really important and a lot of times it's overlooked. And what this is gonna do is essentially maintain or trickle charge your Mazda's battery whenever you're flat towing it. more


Watch Video

5/3/2022 9:23:07 AM



Yakima HoldUp Hitch Bike Racks Review - 2020 Mazda CX-5- Video

Yakima HoldUp Hitch Bike Racks Review - 2020 Mazda CX-5

Andy: Hello everyone, Andy, with e-trailer.com. Today, we're going to take a look at the Yakima holdup two-bike rack on our 2020 Mazda CX-5. Some of the nice features about this bike rack are going to be having the wheel mounted hooks. It's going to work great with carbon frame bikes. Also, the adjustability in order to work with other larger bikes, let's say 29 inch mountain bikes. Taking a look at this rack, you're going to see that it comes in a very nice sleek, black finish. more


Watch Video

12/2/2020 9:07:18 AM



Yakima Roof Rack Fairing Review - 2013 Mazda 5- Video

Yakima Roof Rack Fairing Review - 2013 Mazda 5

Today, on our 2013 Mazda 5, we're going to be test fitting the 44 inch fairing for Yakima Roof Rack Crossbars, part number Y07048. With the Yakima Control Towers Roof Rack System already installed on the Mazda, well begin our test fit by placing our fairing directly in front of our crossbar. We will then start bringing our clips and clamps around our bar. With all four of them positioned around our bar, well take a quick look to be sure we have our fairing centered. Well then place a carriage bolt down to the outermost clamp and secure it with a wing nut on the underside. Well do this on both sides on the outermost clamp. more


Watch Video

5/27/2014 11:02:42 AM



Yakima Roof Rack Fairing Review - 2013 Mazda 3- Video

Yakima Roof Rack Fairing Review - 2013 Mazda 3

Today on our 2013 Mazda 3. We'll be test fitting the 44 inch fairing for Yakuma roof rack crossbars. Part number Y07048. With the Yakuma control towers roof rack system already installed on our vehicle. We'll begin our test fit by placing our fairing directly on the roof of our vehicle. We would then would then going to bring our black clips around our crossbar. Once we have all four clips around our crossbars, we'll then take the two carriage bolts along with the two wing knots and install one on the passenger side, and one on the driver side. more


Watch Video

3/18/2014 5:16:47 PM



Yakima Roof Rack Fairing Review - 2009 Mazda 3- Video

Yakima Roof Rack Fairing Review - 2009 Mazda 3

Today on 2009 Mazda 3, we'll be test fitting the 44 inch fairing for our Yakima roof rack, part number Y07048. With the Yakima round bar roof rack system assembled to our vehicle, we'll begin our test fit by removing the bolts and wing nuts from our fairing. We can then place the clips around our front bar and center it in line with our vehicle. Once we have it positioned the way we like, here on the passenger side, we'll drop our bolt through the first clip and we'll secure it by tightening the wing nut on the bottom side. We'll move to the driver's side and repeat that process. Just like that, our Yakima fairing is on and we're ready to go. That completes today's test fit for 44 fairing for Yakima roof rack cross bars, part number Y07048 on our 2009 Mazda 3. . more


Watch Video

9/26/2013 11:13:21 AM



  1